-------------------------------------------------------- | | | NanoSim Version G-2012.06 (RHEL64) | | Copyright (c) 2012 Synopsys Inc., All Rights Reserved. | | | -------------------------------------------------------- Built by nsmgr on Fri May 18 18:17:12 PDT 2012 Mon May 27 11:45:12 EDT 2013 Machine Name: linux-lab-11 Command line options: -n bbara_new_K0_I1000.sp -o bbara_new_K0_I1000 -c bbara_new_K0_I1000.cfg The 64-bit version of the simulator is running. Initializing system messages took 0.010 s LICENSE Information: -- Key: TIMEMILL__NSADDON -- Version: 2012.06 Installing interactive/configuration commands ... Installing commands took 0.010 s Start netlist compilation at Mon May 27 11:45:12 2013 Compiling "bbara_new_K0_I1000.sp" (SPICE) Compiling "/home/borowcm/RESEARCH/libraries/saed90nm.cdl" (SPICE) Compiling "/home/borowcm/RESEARCH/libraries/SAED90nm.lib" (SPICE) Compiling "/home/borowcm/RESEARCH/libraries/SAED90nm.lib" (SPICE) Compiling "bbara_new_K0_I1000_stim.sp" (SPICE) Parsing netlist finished in 1 seconds Default circuit temperature : 25.000 Netlist compilation will be case insensitive. All letters will be converted to lower case. Building instance tree finished in 0 seconds Finish netlist compilation at Mon May 27 11:45:13 2013 Netlist compilation took 0.310 s NOTICE:Techfile Voltage (*nanosim tech="voltage") set to 1.2V ... This simulation uses HSPICE models WARNING:NanoSim:0x21104432:MISC MODEL PROBLEM: ** warning** associated with encrypted blocks were suppressed Building node/element arrays took 2.050 s Reading configuration files ... Reading configuration files took 0.000000 s WARNING:NanoSim:0x21108427:Output current waveform sampling resolution (= 1e-15 A) is smaller than the simulation current resolution (= 1e-12 A). # of CMOS elements : 1332 # of resistors : 1 # of dc voltage sources : 2 # of independent sources : 6 # of current controlled current sources : 1 # of elements : 1342 # of used elements : 1341 # of nodes : 667 # of subckt : 342 # of top-level instances : 174 # of capacitors from netlist : 1 # of Ground CAPS from netlist : 1 # of Coupling CAPS from netlist : 0 Circuit partitioning ... Among 1 stages, there are: 0 pwl stages 0 grouped pwl stages 1 analog stages 0 NR stages 0 grouped analog stages 0 rc stages 0 ud stages 0 ADFMI functional model stages 658 nodes in the largest pwl stage 0 nodes in the largest digital stage 1 stages (1 PWL stages) with 650-699 nodes Among 667 nodes, there are: 0 pwl nodes 0 analog (accurate) nodes 667 rc nodes 0 ud nodes 0 cut nodes 0 mem_cut nodes 658 no_clamp nodes 658 nodes in stages 9 voltage source nodes 3 constant nodes 0 NR nodes Among 1342 elements, there are: 1335 elements in stages 1335 pwl elements 0 synchronous elements 0 SMS elements 0 analog (accurate) elements 0 rc elements 0 ud elements 0 ADFMI functional model elements 0 VERILOGA model elements 0 behavioral model elements 1335 mna elements 0 NR elements 0 mos transistors identified as keepers 1332 mos transistors need Subthreshold current 0 keepers removed 0 keepers reduced Circuit partitioning took 0.000 s Constructing matrix ... Matrix ordering and construction took 0.000 s After reading configuration file(s), 1 signals are identified to be printed: 1 element branch current signals, including: 1 element branch inst. current signals Statistics of memory used for signal printing: 434784 bytes allocated in total, including: 160000 bytes allocated additionally for node current signals 274784 bytes allocated additionally for element branch current signals Levelizing stages ... Levelizing stages took 0.000 s DC initialization ... WARNING:NanoSim:0x2110e526:Element xu111.mmp3 outside tech_file range (vg=-0.8, vd=0.8, vs=1.2)... at 0ns WARNING:NanoSim:0x2110e5f7:NOTICE: tech_file range is being expanded. WARNING:NanoSim:0x2110e526:Element xu111.mmp1 outside tech_file range (vg=0.8, vd=-0.8, vs=1.2)... at 0ns WARNING:NanoSim:0x2110e5f7:NOTICE: tech_file range is being expanded. WARNING:NanoSim:0x2110e526:Element xu111.mmp2 outside tech_file range (vg=0.8, vd=-0.8, vs=1.2)... at 0ns WARNING:NanoSim:0x2110e5f7:NOTICE: tech_file range is being expanded. WARNING:NanoSim:0x2110e526:Element xu149.mmp1 outside tech_file range (vg=-0.8, vd=0.8, vs=1.2)... at 0ns WARNING:NanoSim:0x2110e5f7:NOTICE: tech_file range is being expanded. WARNING:NanoSim:0x2110e526:Element xu209.mmp2 outside tech_file range (vg=-0.8, vd=0.8, vs=1.2)... at 0ns WARNING:NanoSim:0x2110e5f7:NOTICE: tech_file range is being expanded. WARNING:NanoSim:0x2110e526:Element xu204.mmp2 outside tech_file range (vg=0.8, vd=-0.8, vs=1.2)... at 0ns WARNING:NanoSim:0x2110e5f7:NOTICE: tech_file range is being expanded. WARNING:NanoSim:0x2110e526:Element xu204.mmp1 outside tech_file range (vg=-0.8, vd=-0.8, vs=1.2)... at 0ns WARNING:NanoSim:0x2110e526:Element xu204.mmp1 outside tech_file range (vg=-0.8, vd=-0.8, vs=1.2)... at 0ns WARNING:NanoSim:0x2110e5f7:NOTICE: tech_file range is being expanded. WARNING:NanoSim:0x2110e526:Element xstate_reg[4].mmp012 outside tech_file range (vg=0.8, vd=-0.8, vs=1.2)... at 0ns WARNING:NanoSim:0x2110e5f7:NOTICE: tech_file range is being expanded. WARNING:NanoSim:0x2110e526:Element xstate_reg[4].mmp10 outside tech_file range (vg=-0.8, vd=0.8, vs=1.2)... at 0ns WARNING:NanoSim:0x20102001:Previous message has been printed 10 times, It will not be printed again! To change the limit for every message type, use: "set_mesg_opt limit_per_mesg=" WARNING:NanoSim:0x2110e5f7:NOTICE: tech_file range is being expanded. WARNING:NanoSim:0x2110e5f7:NOTICE: tech_file range is being expanded. WARNING:NanoSim:0x20102001:Previous message has been printed 10 times, It will not be printed again! To change the limit for every message type, use: "set_mesg_opt limit_per_mesg=" Finishing initialization (level 0 -- 0) 1 dynamic stages assigned in DC Initialization Number of residual dc events scheduled : 0 Number of ic nodes scheduled : 0 DC initialization took 1.030 s Simulation begins in pwl mode ... WARNING:NanoSim:0x2110f524:Positive bulk-source bias: element xnextstate_reg[2].mmn7, vbs=0.530914... at 25.22ns WARNING:NanoSim:0x2110f524:Positive bulk-source bias: element xnextstate_reg[2].mmn4, vbs=0.530914... at 25.22ns WARNING:NanoSim:0x2110f524:Positive bulk-source bias: element xnextstate_reg[6].mmn10, vbs=0.400295... at 30.15ns WARNING:NanoSim:0x2110f524:Positive bulk-source bias: element xnextstate_reg[5].mmn7, vbs=0.418518... at 30.21ns WARNING:NanoSim:0x2110f524:Positive bulk-source bias: element xnextstate_reg[5].mmn4, vbs=0.418518... at 30.21ns WARNING:NanoSim:0x2110f524:Positive bulk-source bias: element xstate_reg[3].mmn5, vbs=0.482908... at 34.99ns WARNING:NanoSim:0x2110f524:Positive bulk-source bias: element xstate_reg[3].mmn6, vbs=0.482908... at 34.99ns WARNING:NanoSim:0x2110f524:Positive bulk-source bias: element xstate_reg[3].mmn10, vbs=0.440052... at 35.03ns WARNING:NanoSim:0x2110f524:Positive bulk-source bias: element xstate_reg[3].mmn12, vbs=0.440052... at 35.03ns WARNING:NanoSim:0x2110f524:Positive bulk-source bias: element xu179.mmn2, vbs=0.461816... at 35.09ns WARNING:NanoSim:0x20102001:Previous message has been printed 10 times, It will not be printed again! To change the limit for every message type, use: "set_mesg_opt limit_per_mesg=" WARNING:NanoSim:0x2110f525:Negative bulk-source bias: element xstate_reg[3].mmp10, vbs=-0.410992... at 40ns WARNING:NanoSim:0x2110f525:Negative bulk-source bias: element xstate_reg[3].mmp12, vbs=-0.410992... at 40ns WARNING:NanoSim:0x2110f525:Negative bulk-source bias: element xu146.mmp3, vbs=-0.570568... at 55.03ns WARNING:NanoSim:0x2110f525:Negative bulk-source bias: element xu146.mmp4, vbs=-0.570568... at 55.03ns WARNING:NanoSim:0x2110f525:Negative bulk-source bias: element xstate_reg[4].mmp10, vbs=-0.410961... at 60ns WARNING:NanoSim:0x2110f525:Negative bulk-source bias: element xstate_reg[4].mmp12, vbs=-0.410961... at 60ns WARNING:NanoSim:0x2110f525:Negative bulk-source bias: element xstate_reg[0].mmp10, vbs=-0.411007... at 70ns WARNING:NanoSim:0x2110f525:Negative bulk-source bias: element xstate_reg[0].mmp12, vbs=-0.411007... at 70ns WARNING:NanoSim:0x2110f525:Negative bulk-source bias: element xu131.mmp3, vbs=-0.54698... at 75.03ns WARNING:NanoSim:0x2110f525:Negative bulk-source bias: element xu131.mmp4, vbs=-0.54698... at 75.03ns WARNING:NanoSim:0x20102001:Previous message has been printed 10 times, It will not be printed again! To change the limit for every message type, use: "set_mesg_opt limit_per_mesg=" Simulation ends at 10040.000 ns Simulation took 999.030 s Current information calculated over the intervals: 0.00000e+00 - 1.00400e+04 ns Simulation time resolution : 1.000e-02 ns Print time resolution : 1.000e-02 ns Number of PWL matrix solutions : 231581 Number of PWL MOS model lookups : 135496930 Number of time steps : 231318 Number of iterations : 0 Number of rejected time steps : 31901 Global simulation parameters used: SPD 0.18V ASPD 0.06V SIM_DESV 0.18V SIM_AESV 0.06V VDS_MIN 9.34266e-11V AVDS_MIN 9.34266e-11V SSC (steady state current) 1e-07uA SUBI (subthreshold current) 1e-06uA DC CURRENT 1e-06uA 1005.0 real 1003.0 user 0.2 sys Signal data is saved in bbara_new_K0_I1000.out No errors reported in the .err file (bbara_new_K0_I1000.err)