-------------------------------------------------------- | | | NanoSim Version G-2012.06 (RHEL64) | | Copyright (c) 2012 Synopsys Inc., All Rights Reserved. | | | -------------------------------------------------------- Built by nsmgr on Fri May 18 18:17:12 PDT 2012 Fri Jun 21 12:50:46 EDT 2013 Machine Name: linux-lab-11 Command line options: -n bbara_nohw_K0_I1000.sp -o bbara_nohw_K0_I1000 -c bbara_nohw_K0_I1000.cfg The 64-bit version of the simulator is running. Initializing system messages took 0.010 s LICENSE Information: -- Key: TIMEMILL__NSADDON -- Version: 2012.06 Installing interactive/configuration commands ... Installing commands took 0.010 s Start netlist compilation at Fri Jun 21 12:50:46 2013 Compiling "bbara_nohw_K0_I1000.sp" (SPICE) Compiling "/home/borowcm/RESEARCH/libraries/saed90nm.cdl" (SPICE) Compiling "/home/borowcm/RESEARCH/libraries/SAED90nm.lib" (SPICE) Compiling "/home/borowcm/RESEARCH/libraries/SAED90nm.lib" (SPICE) Compiling "bbara_nohw_K0_I1000_stim.sp" (SPICE) Parsing netlist finished in 1 seconds Default circuit temperature : 25.000 Netlist compilation will be case insensitive. All letters will be converted to lower case. Building instance tree finished in 0 seconds Finish netlist compilation at Fri Jun 21 12:50:47 2013 Netlist compilation took 0.300 s NOTICE:Techfile Voltage (*nanosim tech="voltage") set to 1.2V ... This simulation uses HSPICE models WARNING:NanoSim:0x21104432:MISC MODEL PROBLEM: ** warning** associated with encrypted blocks were suppressed Building node/element arrays took 1.730 s Reading configuration files ... Reading configuration files took 0.000000 s WARNING:NanoSim:0x21108427:Output current waveform sampling resolution (= 1e-15 A) is smaller than the simulation current resolution (= 1e-12 A). # of CMOS elements : 646 # of resistors : 1 # of dc voltage sources : 2 # of independent sources : 6 # of current controlled current sources : 1 # of elements : 656 # of used elements : 655 # of nodes : 327 # of subckt : 342 # of top-level instances : 88 # of capacitors from netlist : 1 # of Ground CAPS from netlist : 1 # of Coupling CAPS from netlist : 0 Circuit partitioning ... Among 1 stages, there are: 0 pwl stages 0 grouped pwl stages 1 analog stages 0 NR stages 0 grouped analog stages 0 rc stages 0 ud stages 0 ADFMI functional model stages 318 nodes in the largest pwl stage 0 nodes in the largest digital stage 1 stages (1 PWL stages) with 300-349 nodes Among 327 nodes, there are: 0 pwl nodes 0 analog (accurate) nodes 327 rc nodes 0 ud nodes 0 cut nodes 0 mem_cut nodes 318 no_clamp nodes 318 nodes in stages 9 voltage source nodes 3 constant nodes 0 NR nodes Among 656 elements, there are: 649 elements in stages 649 pwl elements 0 synchronous elements 0 SMS elements 0 analog (accurate) elements 0 rc elements 0 ud elements 0 ADFMI functional model elements 0 VERILOGA model elements 0 behavioral model elements 649 mna elements 0 NR elements 0 mos transistors identified as keepers 646 mos transistors need Subthreshold current 0 keepers removed 0 keepers reduced Circuit partitioning took 0.000 s Constructing matrix ... Matrix ordering and construction took 0.000 s After reading configuration file(s), 1 signals are identified to be printed: 1 element branch current signals, including: 1 element branch inst. current signals Statistics of memory used for signal printing: 429296 bytes allocated in total, including: 160000 bytes allocated additionally for node current signals 269296 bytes allocated additionally for element branch current signals Levelizing stages ... Levelizing stages took 0.000 s DC initialization ... WARNING:NanoSim:0x2110e526:Element xu64.mmp1 outside tech_file range (vg=-0.00198952, vd=-0.8, vs=1.2)... at 0ns WARNING:NanoSim:0x2110e5f7:NOTICE: tech_file range is being expanded. WARNING:NanoSim:0x2110e526:Element xu64.mmp2 outside tech_file range (vg=0.8, vd=-0.8, vs=1.2)... at 0ns WARNING:NanoSim:0x2110e5f7:NOTICE: tech_file range is being expanded. WARNING:NanoSim:0x2110e526:Element xu64.mmp3 outside tech_file range (vg=0.0119576, vd=-0.8, vs=1.2)... at 0ns WARNING:NanoSim:0x2110e5f7:NOTICE: tech_file range is being expanded. WARNING:NanoSim:0x2110e526:Element xu72.mmp3 outside tech_file range (vg=-0.8, vd=0.8, vs=1.2)... at 0ns WARNING:NanoSim:0x2110e5f7:NOTICE: tech_file range is being expanded. WARNING:NanoSim:0x2110e526:Element xu61.mmp2 outside tech_file range (vg=-0.8, vd=0.8, vs=1.2)... at 0ns WARNING:NanoSim:0x2110e5f7:NOTICE: tech_file range is being expanded. WARNING:NanoSim:0x2110e526:Element xu82.mmp2 outside tech_file range (vg=0.8, vd=-0.8, vs=1.2)... at 0ns WARNING:NanoSim:0x2110e5f7:NOTICE: tech_file range is being expanded. WARNING:NanoSim:0x2110e526:Element xu82.mmp1 outside tech_file range (vg=-0.8, vd=-0.8, vs=1.2)... at 0ns WARNING:NanoSim:0x2110e526:Element xu82.mmp1 outside tech_file range (vg=-0.8, vd=-0.8, vs=1.2)... at 0ns WARNING:NanoSim:0x2110e5f7:NOTICE: tech_file range is being expanded. WARNING:NanoSim:0x2110e526:Element xu77.mmp2 outside tech_file range (vg=0.8, vd=-0.8, vs=1.2)... at 0ns WARNING:NanoSim:0x2110e5f7:NOTICE: tech_file range is being expanded. WARNING:NanoSim:0x2110e526:Element xu77.mmp1 outside tech_file range (vg=-0.8, vd=-0.8, vs=1.2)... at 0ns WARNING:NanoSim:0x20102001:Previous message has been printed 10 times, It will not be printed again! To change the limit for every message type, use: "set_mesg_opt limit_per_mesg=" WARNING:NanoSim:0x2110e5f7:NOTICE: tech_file range is being expanded. WARNING:NanoSim:0x2110e5f7:NOTICE: tech_file range is being expanded. WARNING:NanoSim:0x20102001:Previous message has been printed 10 times, It will not be printed again! To change the limit for every message type, use: "set_mesg_opt limit_per_mesg=" Finishing initialization (level 0 -- 0) 1 dynamic stages assigned in DC Initialization Number of residual dc events scheduled : 0 Number of ic nodes scheduled : 0 DC initialization took 0.140 s Simulation begins in pwl mode ... WARNING:NanoSim:0x2110f524:Positive bulk-source bias: element xnextstate_reg[2].mmn7, vbs=0.423482... at 20.19ns WARNING:NanoSim:0x2110f524:Positive bulk-source bias: element xnextstate_reg[2].mmn4, vbs=0.423482... at 20.19ns WARNING:NanoSim:0x2110f524:Positive bulk-source bias: element xrtext_reg[1].mmn7, vbs=0.418153... at 25.13ns WARNING:NanoSim:0x2110f524:Positive bulk-source bias: element xrtext_reg[1].mmn4, vbs=0.418153... at 25.13ns WARNING:NanoSim:0x2110f524:Positive bulk-source bias: element xstate_reg[2].mmn10, vbs=0.417198... at 29.99ns WARNING:NanoSim:0x2110f524:Positive bulk-source bias: element xstate_reg[2].mmn12, vbs=0.417198... at 29.99ns WARNING:NanoSim:0x2110f524:Positive bulk-source bias: element xstate_reg[4].mmn10, vbs=0.417163... at 29.99ns WARNING:NanoSim:0x2110f524:Positive bulk-source bias: element xstate_reg[4].mmn12, vbs=0.417163... at 29.99ns WARNING:NanoSim:0x2110f524:Positive bulk-source bias: element xnextstate_reg[0].mmn7, vbs=0.411663... at 30.14ns WARNING:NanoSim:0x2110f524:Positive bulk-source bias: element xnextstate_reg[0].mmn4, vbs=0.411663... at 30.14ns WARNING:NanoSim:0x20102001:Previous message has been printed 10 times, It will not be printed again! To change the limit for every message type, use: "set_mesg_opt limit_per_mesg=" WARNING:NanoSim:0x2110f525:Negative bulk-source bias: element xstate_reg[2].mmp10, vbs=-0.410964... at 50ns WARNING:NanoSim:0x2110f525:Negative bulk-source bias: element xstate_reg[2].mmp12, vbs=-0.410964... at 50ns WARNING:NanoSim:0x2110f525:Negative bulk-source bias: element xstate_reg[4].mmp10, vbs=-0.410962... at 50ns WARNING:NanoSim:0x2110f525:Negative bulk-source bias: element xstate_reg[4].mmp12, vbs=-0.410962... at 50ns WARNING:NanoSim:0x2110f525:Negative bulk-source bias: element xstate_reg[3].mmp10, vbs=-0.410864... at 160ns WARNING:NanoSim:0x2110f525:Negative bulk-source bias: element xstate_reg[3].mmp12, vbs=-0.410864... at 160ns WARNING:NanoSim:0x2110f525:Negative bulk-source bias: element xu57.mmp6, vbs=-0.63361... at 235.12ns WARNING:NanoSim:0x2110f525:Negative bulk-source bias: element xu101.mmp4, vbs=-0.450201... at 305.03ns WARNING:NanoSim:0x2110f525:Negative bulk-source bias: element xu101.mmp3, vbs=-0.450201... at 305.03ns WARNING:NanoSim:0x2110f525:Negative bulk-source bias: element xu45.mmp4, vbs=-0.440266... at 310.03ns WARNING:NanoSim:0x20102001:Previous message has been printed 10 times, It will not be printed again! To change the limit for every message type, use: "set_mesg_opt limit_per_mesg=" Simulation ends at 10040.000 ns Simulation took 89.140 s Current information calculated over the intervals: 0.00000e+00 - 1.00400e+04 ns Simulation time resolution : 1.000e-02 ns Print time resolution : 1.000e-02 ns Number of PWL matrix solutions : 67971 Number of PWL MOS model lookups : 34192443 Number of time steps : 67867 Number of iterations : 0 Number of rejected time steps : 8977 Global simulation parameters used: SPD 0.18V ASPD 0.06V SIM_DESV 0.18V SIM_AESV 0.06V VDS_MIN 9.34266e-11V AVDS_MIN 9.34266e-11V SSC (steady state current) 1e-07uA SUBI (subthreshold current) 1e-06uA DC CURRENT 1e-06uA 92.0 real 91.9 user 0.2 sys Signal data is saved in bbara_nohw_K0_I1000.out No errors reported in the .err file (bbara_nohw_K0_I1000.err)